Community

Using an espresso Display at the Lufthansa First Class Lounge

Using an espresso Display at the Lufthansa First Class Lounge

Thank you for using an espresso Display! We’re thrilled to help you work more productively while you’re achieving your goals at the Lufthansa First Class Lounge.

This page has been created to ensure that you setup the espresso Display 15 and are working at your best. Below you will find an instructional setup video, as well as a written step by step guide for setting up the espresso Display 15 with the Stand+. 

If you prefer video, watch the below clip that demonstrates the basic steps of setting up an espresso Display:


Setting up the espresso Display 15 and Stand+

Check:

To use the display, you will need the monitor, stand, espresso USB-C cable, and your laptop.

You can view the video, or read the steps outlined below.

Step 1:

To get started, place the Stand+ on a flat surface. Extend the magnetic plate of the Stand+ to a standing position shown in the graphic below.

Place the base on a table, and extend the magnetic plate to a standing position.

Step 2:

From here, there are two viewing angles to consider when using the Stand+.

Standard Mode:

To achieve Standard mode viewing angle, place the rear of the display onto the magnetic plate. It should attach securely at the centre of the display as shown.

Stand+ set up in Standard mode.
Plus Mode:

Plus mode gives you a more ergonomic workspace and places the display screen above your laptop.

To achieve Plus mode, look to base of the stand and you will find a groove to extend the stand’s base to form a wedge. Extend the hinge and place the stand on the desk. Then, extend the neck of the magnetic plate as shown in the image below.

Once the display is in Plus mode, you can attach the rear of the display to the stand.

Stand+ 'Plus Mode' allows you to view your screens in a more ergonomic way.

Step 3:

To get started, simply connect one end of the provided USB-C cable into your espresso, and the other end into your device.

Connect the official espresso USB-C cable between the display and your laptop and get to work.

Note:

The espresso only works with the cable we provide - it’s special. If nothing happens, ensure both ends are plugged in securely. If still having issues, you can get support at espres.so/support

You're ready to go! If you need to rearrange your screen layout to extend your screens, please follow the directions below:

Windows:

  1. Right-click on your desktop and select “Display settings.”
  2. Scroll down to the “Rearrange your displays” section.
  3. Click and drag the displayed screens to match the physical arrangement of your monitors.
  4. Click “Apply” to save the configuration.

If necessary, adjust the primary monitor by right-clicking on the desired screen and choosing “Make this my main display.”

Mac:

  1. Click on the Apple menu and select “System Preferences.”
  2. Click “Displays,” then select the “Arrangement” tab.
  3. Drag the blue boxes to rearrange your displays to match their physical setup.
  4. To set the primary display, drag the white menu bar to the screen you want to designate as the main one.

Continue Reading

;